REAC Pre-Inspection Checklist
REAC Pre-Inspection Checklist
Inspecting the property for these items will help you when you are preparing for a REAC inspection:
- Inspect for any trip hazards
- Inspect parking lots for ponding water
- Inspect basement area for settlement
- Check roof for any holes or openings, and check the ballast on flat roofs to be sure it’s even
- Check all brick and concrete buildings for any exposed reinforcing bar, missing mortar or any holes
- Inspect cable television and telephone wiring
- Check all satellite television dishes for proper mountings
- Check the disconnects for large equipment and make sure all disconnects have padlocks
- Check all breaker boxes for missing covers or plates
- Check all windows for cracked or fogged window panes
- Check all elevator control panels, signal panels and hoist controls
- Inspect all fire extinguishers in public areas, common areas and units
- Remove any unused items that are abandoned and have wiring
- Check for deficiencies in units and repair them
- Check battery-powered emergency lights
- Inspect all sprinkler heads
- Inspect seals on all exterior doors
- Test every GFI with a GFI tester (GFCI testers help determine whether electrical receptacles are providing power and that they are properly wired for safe operation)
- Check smoke detectors
A more detailed list can be found by searching, “UPCs Inspection Checklist”.